Audífono Inálambrico Manos Libres Blanco I7 V4.1+EDR


Audífono Inálambrico Manos Libres Blanco I7 V4.1+EDR


Audífono Inálambrico Manos Libres Blanco I7 V4.1+EDR


  • Support incoming number calling.
  • Support 1 connect 2 function, Bluetooth can be connected to two mobile phones.
  • Making phone calls. You answer the call by slightly press the power button one time and refuse to answer by quick press the power button 2 times. When the earphones are in music mode, you dial your latest number by quick press the power button 2 times (redial the latest number).
  • Listening to music. Shortly press the power button to stop the music and replay by press again.
  • Language switching. In the pairing state, double-click the multi-function button. After the switch is successful, there will be voice prompt, and the voice cycle can be switched.

Warm hint: To make phone calls or listening to music should be sure the earphone connected with your mobile phone.




Model: HBQ i7

Color: As the picture show

Wireless version: dual-mode Bluetooth V4.1+EDR, ultra-low power consumption

Support agreement: A2DP1.3/ HFP1.6/ HSP1.2/ AVRCP1.6/ D11.3

Input: DC5V

Bluetooth frequency: 2.4GHZ

Speaker impedance: 32Ω

Microphones sensitivity: -42db

Bluetooth transmission distance: 33 feet or 10 meters in clear space

Battery capacity: 60mAh

Standby time: 120 hours

Playing/ Talking time: 3-4 hours

Charging time: 1~2 hours

Working temperature: -10~55℃

Dimension: approx. 4.9cm×2cm×1.8cm/1.93×0.79×0.71in

Weight: approx. 12g


Package included:


1pcs Bluetooth headset

1pcs USB charging cable

1pcs User manual




1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.

2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving.

3. Please use this earphone under its working range (10 meters), and the effect would be better if there is no obstacle between the connected devices.

4. When charging, use a charger that is qualified and charging current is less than 1A to change it.

5. Use this Bluetooth earphone to connect any device with Bluetooth function.




*Power off: Long press the power button until LED in red when not use, the Bluetooth device enter off mode. It would be power off automatically when the earphone away from your Bluetooth device over 5 minutes. Do not need to worry power exhausted.

* Connection: First time connection, short press the power button until the LED flash in blue and red alternately. Headset automatically enters pairing status, then turn on the Bluetooth on your Smart-phone to search available device, then you could listen to music or make calls.

* 1 connect 2 function:

  • Connecting to the first Bluetooth device successfully, turn off the first Bluetooth device.
  • Connect to the second Bluetooth device.
  • Turn on the first Bluetooth device.

4) Turn off the Bluetooth earbud, then turn it on again. Earbud LED indicator flash blue. And the Bluetooth earbud connect to the first and second Bluetooth device successfully.



Envíos a Nivel Nacional