Máscara Uv para Reparación Placas Pcb Baku BK-126
- Model: BK-126
- Certificate: ISO9001
- Solidified temperature: 110-120℃ ×10-15min
- Heat-patience: 260±5℃ 10s 3 times
- Viscosity (centipoise 25℃) 200±50ps
- Hardness: ≥6H
- Net: 8g
-Insulates printed ciruit board against shorting and arcing
-Pritects PCB traces from corrosion and moisture
-Also used for reoairing PCB after soldering and reworking
-UV light-cured solder resist ink,over the net performance,fast curing,strong adhesion,chemical resistance and insulation,single-sided circuit board solder with.
1.Insulates printed circuit board against shorting and arcing.
2.Protect PCB traces from corrosion and moisture.
3.Also used for repairing PCB after soldering and reworking.
1. Used in electronic components insulation and protection welding trend.
2. Circuit board the ideal repair liquid and the patron saint of components.
3. Small batch PCB production line layer surface protection resistance welding.
Dedicated to all kinds of PCB resistance welding layer flake or local damage, and fly line insulation curing use, maintenance motherboard the necessary material mobile phone, and can also be used to make a small amount of PCB!
UV Curable Solder Mask Industrial use:
(1) Preventing physical disconnection of the conductor circuit ;
(2) Welding process, to prevent a short circuit due to bridging generated;
(3) Only at the welding portion to be welded, to avoid the waste of the solder;
(4) reduce the welding chute copper contamination;
(5) to prevent dust, moisture and other environmental factors cause insulation deterioration, corrosion;
(6) high insulation resistance, high-density circuits becomes possible.
How to use:
1.Apply paint on your PCB
2.Spread it on the PCB with covering the transparent mask film
3.Expose it under UV light (or sun) for a few minutes
4.Wash away the extra paint by gasoline or oil base solvent
Envíos a Nivel Nacional